FEATURES
QUESTIONS?
- Weight: 45 grams
- Kit Includes: 1x Range lever with 22.2mm mount
- Compatibility: Compatible with all 22.2mm handlebars
- Dropper Compatibility: Compatible with all cable-actuated dropper posts.
- Cable Routing: Stealth routing
- Clamp Styles: 22.2mm mount with Sram MMX direct mount built into lever
This lever will function on the right side of your handlebars, though it is intended to be used on the left side of your handlebars, underneath the handlebar.
The only color option for the Range lever is black at this time, thumb pads cannot be swapped.
The Range lever features updated Stealth cable routing and the iconic Loam silicone thumb pad for added comfort when actuating your dropper post.
- The Range lever features a forged body and three mounting positions. Without the mount, the Range lever is MMX compatible.
- The Loam Lever 2 is 5-axis, CNC’d for a sharper cleaner look and lighter weight, it features a larger sealed bearing, and comes in many colors.
The Loam lever mount is not compatible with the Range lever.
You must select the option with the cable kit if you'd like cables and housing included.
Yes with the 22.2mm mount, you can use the Range lever with your Magura brake, with Maguras Shiftmix MMX/SRAM mount.
Yes with the 22.2mm mount, you can use the Range lever with your TRP brake, with TRP's integrated MMX adapter.
Yes with the 22.2mm mount, you can use the Range lever with your Hayes brake, with Hayes’ Peacemaker MMX adapter.
Yes with the 22.2mm mount, you can use the Range lever with your Hope brake, with Hopes’ MMX LH Shifter mount.
Yes
Yes, the Range Lever is MMX compatible. All you have to do is remove the 22.2mm mount that comes with the lever and bolt the lever body to your existing MMX mount.
Front shifters and 1x levers take up the same space on the handlebar, so it is not recommended to use them together. Check out our Puget 2x lever for a more ergonomic dropper lever option designed for 2x drive trains.
This lever only works on 22.2mm flat handlebars. Since drop handlebars use a larger diameter this lever will not work on drop bar gravel bikes.
Yes. If you ever find your lever crunchy or slow to rotate, we recommend these steps:
- Remove the 3mm bearing bolt on the bottom of the lever
- Remove the lever itself
- Thoroughly clean the bearing and bearing interface
- Use a small amount of light grease, then reinstall your lever.
The Range lever is made out of 6061 Aluminum.
Yes. Check for clearance under your handlebars on the left side, but as long as you have room on your handlebars this lever will work with e-bikes.